This beekeeper prefers to make the regular apiary visits by bicycle. When the equipment to be transported is heavy and/or bulky he uses a trailer. The trailer shown in the first picture is a Bykaboose Gecko (www.bykaboose.com, IL, USA) with the superstructure replaced by a fish box which was found washed up on the coast. The fish box neatly fits the 'National' hive boxes used. In the trailer in the picture are two shallow boxes or 'supers' containing the frames of comb with honey. The payload of this trailer is about 40kg, sufficient for at least two completely full supers.

The next four pictures show the stainless steel Saf Natura manual 9-frame radial extractor (www.safnatura.com) used to centrifuge the honey out of the comb. The wax cappings of the comb are first removed with an uncapping fork (pictures 5 and 6). The frame is then placed in the rotor of the extractor with the normally horizontal top bar of each frame now in a vertical orientation towards the wall of the extractor. As the bees make the cells in the comb slope slightly downwards from their openings (presumably to prevent nectar from running out), when the rotor is set spinning with the frames in this orientation by turning the handle on the extractor, the cells behave like thousands of little buckets being tipped to empty them. The rotor is turned until no more droplets of honey fly against the outer wall of the extractor. The honey runs down the wall and collects in the bottom of the extractor (visible in the second picture). It is removed
through a tap (not shown) near the base.

The honey, which at this stage contains many small pieces of wax from the cappings, is transferred to a stainless steel strainer (not shown) which sits in the top of the 'ripener', the stainless steel urn shown in the 7th picture. It is then left overnight to allow the many small air bubbles and wax particles small enough to pass through the strainer to rise to the surface. If the crop is especially big it is stirred in the ripener first to ensure uniformity of the bottled product. The honey is poured into one pound jars using the tap at the bottom of the ripener and the lids are screwed in place.